Digisol DG-FS4528P, Руководство по управлению

Страница: 144 / 973

C
HAPTER
5 | Simple Network Management Protocol
Configuring Remote SNMPv3 Users
– 144 –
C
OMMAND
U
SAGE
To grant management access to an SNMPv3 user on a remote device,
you must first specify the engine identifier for the SNMP agent on the
remote device where the user resides. The remote engine ID is used to
compute the security digest for authentication and encryption of
packets passed between the switch and the remote user. (See
"Specifying Trap Managers and Trap Types" and “ Specifying a Remote
Engine ID .”)
P
ARAMETERS
These parameters are displayed:
User Name – The name of user connecting to the SNMP agent.
(Range: 1-32 characters)
Group Name – The name of the SNMP group to which the user is
assigned. (Range: 1-32 characters)
Remote IP – The Internet address of the remote device where the
user resides.
Security Model – The user security model. (SNMPv3 only)
Security Level – The following security levels are only used for the
groups assigned to the SNMP security model:
noAuthNoPriv – There is no authentication or encryption used in
SNMP communications. (This is the default security level.)
AuthNoPriv – SNMP communications use authentication, but the
data is not encrypted.
AuthPriv – SNMP communications use both authentication and
encryption.
Authentication Protocol – The method used for user authentication.
(Options: MD5, SHA; Default: MD5)
Authentication Password – A minimum of eight plain text characters
is required.
Privacy Protocol – The encryption algorithm use for data privacy;
only 56-bit DES is currently available.
Privacy Password – A minimum of eight plain text characters is
required.