Digisol DG-FS4528P, Руководство по управлению

Страница: 104 / 973

C
HAPTER
4 | Basic Management Tasks
Managing System Files
– 104 –
W
EB
I
NTERFACE
To save the running configuration file:
1. Click System, File Management > Copy Operation.
2. Select “tftp to startup-config” or “tftp to file” and enter the IP address
of the TFTP server. If you download from an FTP server, enter the user
name and password for an account on the server. Specify the name of
the file to download and select a file on the switch to overwrite or
specify a new file name.
3. Then click Apply.
Figure 13: Copying Configuration Settings
If you replaced a file currently used for startup and want to start using the
new file, reboot the system via the System > Reset menu.
C
OPYING
F
ILES
U
SING
HTTP
In addition to performing copy operations to and from an FTP or TFTP
server, the switch can upload or download files to the web management
station using HTTP.
Both switch operation code files and configuration files can be uploaded/
downloaded using HTTP.
P
ARAMETERS
The following parameters are displayed in the web interface:
File Type – Specify opcode (operation code) to copy a firmware file, or
config (configuration) to copy a switch configuration file.
Source File Name – Use the Browse button to locate the file on the
web management station. The file name should not contain slashes (\ or
/), the leading letter of the file name should not be a period (.), and the
maximum length for file names on is 31 characters for files on the
switch. (Valid characters: A-Z, a-z, 0-9, “.”, “-”, “_”)