manualshive.com logo in svg

Digisol DG-FS4528P, Руководство по управлению

Поделиться
Скачать
Digisol DG-FS4528P Скачать руководство пользователя страница 235

C

HAPTER

 7

  |  Security Measures

DHCP Snooping

–  235  –

 

When DHCP snooping is enabled, DHCP messages entering an 

untrusted interface are filtered based upon dynamic entries learned via 

DHCP snooping.

 

Filtering rules are implemented as follows:

 

If the global DHCP snooping is disabled, all DHCP packets are 

forwarded.

 

If DHCP snooping is enabled globally, and also enabled on the VLAN 

where the DHCP packet is received, all DHCP packets are forwarded 

for a 

trusted

 port. If the received packet is a DHCP ACK message, a 

dynamic DHCP snooping entry is also added to the binding table.

 

If DHCP snooping is enabled globally, and also enabled on the VLAN 

where the DHCP packet is received, but the port is 

not trusted

, it is 

processed as follows:

 

If the DHCP packet is a reply packet from a DHCP server 

(including OFFER, ACK or NAK messages), the packet is 

dropped.

 

If the DHCP packet is from a client, such as a DECLINE or 

RELEASE message, the switch forwards the packet only if the 

corresponding entry is found in the binding table.

 

If the DHCP packet is from a client, such as a DISCOVER, 

REQUEST, INFORM, DECLINE or RELEASE message, the packet 

is forwarded if MAC address verification is disabled. However, if 

MAC address verification is enabled, then the packet will only be 

forwarded if the client’s hardware address stored in the DHCP 

packet is the same as the source MAC address in the Ethernet 

header.

 

If the DHCP packet is not a recognizable type, it is dropped.

 

If a DHCP packet from a client passes the filtering criteria above, it 

will only be forwarded to trusted ports in the same VLAN.

 

If a DHCP packet is from server is received on a trusted port, it will 

be forwarded to both trusted and untrusted ports in the same VLAN.

 

If the DHCP snooping is globally disabled, all dynamic bindings are 

removed from the binding table.

 

Additional considerations when the switch itself is a DHCP client

 – 

The port(s) through which the switch submits a client request to the 

DHCP server must be configured as trusted. Note that the switch 

will not add a dynamic entry for itself to the binding table when it 

receives an ACK message from a DHCP server. Also, when the 

switch sends out DHCP client packets for itself, no filtering takes 

place. However, when the switch receives any messages from a 

DHCP server, any packets received from untrusted ports are 

dropped.

Содержание DG-FS4528P














































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды