Digisol DG-FS4528P, Руководство по управлению

Страница: 154 / 973

C
HAPTER
6 | Sampling Traffic Flows
Configuring sFlow Port Parameters
– 154 –
Receiver Port
4
– The UDP port on which the sFlow Collector is
listening for sFlow streams. (Range: 0-65534; Default: 6343)
Time Out – The time that the sFlow process will continuously send
samples to the Collector before resetting all sFlow port parameters
(receiver owner, time out, max header size, max datagram size, and
flow interval). A time out value of 0 seconds indicates no time out.
(Range: 0-10000000 seconds; Default: 0 seconds)
The check box is cleared by the system if flow sampling is currently
under way. To change the timeout, mark the check box, enter a timeout
value, and click Apply.
Max Header Size – Maximum size of the sFlow datagram header.
(Range: 64-256 bytes; Default: 128 bytes)
Max Datagram Size – Maximum size of the sFlow datagram payload.
(Range: 200-1500 bytes; Default: 1400 bytes)
Flow Interval – The interval at which the sFlow process adds counter
values to the sample datagram. An interval of 0 seconds effectively
disables this feature. (Range: 0-10000000 seconds;
Default: 0 seconds)
W
EB
I
NTERFACE
To configure flow sampling on a port:
1.
Click sFlow, Port Configuration.
2. Select a port to configure from the drop-down list.
3.
Set the parameters for flow Collector, the reset timeout, the payload,
and flow interval.
4. Click Apply
Figure 48: Configuring Global Settings for sFlow