Digisol DG-FS4528P, Руководство по управлению

Страница: 479 / 973

C
HAPTER
22 | System Management Commands
Line
– 479 –
Using the command without specifying a timeout restores the default
setting.
E
XAMPLE
To set the timeout to two minutes, enter this command:
Console(config-line)#timeout login response 120
Console(config-line)#
disconnect
This command terminates an SSH, Telnet, or console connection.
S
YNTAX
disconnect session-id
session-id – The session identifier for an SSH, Telnet or console
connection. (Range: 0-4)
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
Specifying session identifier “0” will disconnect the console connection.
Specifying any other identifiers for an active session will disconnect an SSH
or Telnet connection.
E
XAMPLE
Console#disconnect 1
Console#
R
ELATED
C
OMMANDS
show ssh (578)
show users (457)
show line
This command displays the terminal line’s parameters.
S
YNTAX
show line [ console | vty ]
console - Console terminal line.
vty - Virtual terminal for remote console access (i.e., Telnet).
D
EFAULT
S
ETTING
Shows all lines
C
OMMAND
M
ODE
Normal Exec, Privileged Exec