manualshive.com logo in svg

Digisol DG-FS4528P, Руководство по управлению

Поделиться
Скачать
Digisol DG-FS4528P Скачать руководство пользователя страница 229

C

HAPTER

 7

  |  Security Measures

ARP Inspection

–  229  –

C

ONFIGURING

I

NTERFACE

 S

ETTINGS

FOR

 ARP I

NSPECTION

Use the Security > ARP Inspection > Port Configuration page to specify the 

ports that require ARP inspection, and to adjust the packet inspection rate.

CLI R

EFERENCES

 

"ARP Inspection" on page 639

P

ARAMETERS

These parameters are displayed:

 

Port

 – Port identifier.

 

Trust Status

 – Configures the port as trusted or untrusted. 

(Default: Untrusted)
By default, all untrusted ports are subject to ARP packet rate limiting, 

and all trusted ports are exempt from ARP packet rate limiting.
Packets arriving on trusted interfaces bypass all ARP Inspection and 

ARP Inspection Validation checks and will always be forwarded, while 

those arriving on untrusted interfaces are subject to all configured ARP 

inspection tests.

 

Rate Limit Status

 – If this parameter is enabled, then there is no limit 

on the number of ARP packets that can be processed by the CPU.

 

Rate Limit

 – Sets the maximum number of ARP packets that can be 

processed by CPU per second on untrusted ports. 

(Range: 0-2048; Default: 15) 
The switch will drop all ARP packets received on a port which exceeds 

the configured ARP-packets-per-second rate limit.
Setting the rate limit to “0” means that no ARP packets can be 

forwarded.

W

EB

 I

NTERFACE

To configure interface settings for ARP Inspection: 

1.

Click Security, ARP Inspection, Port Configuration.

2.

Specify any untrusted ports which require ARP inspection, and adjust 
the packet inspection rate.

3.

Click Apply. 

Содержание DG-FS4528P














































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды