Digi AnywhereUSB Plus, Руководство пользователя, Страница: 343 / 815

User authentication Terminal Access Controller Access-Control System Plus ()
AnywhereUSB® Plus User Guide 343
8. Add to the authentication methods:
a. Click Authentication > Methods .
b. For Add method , click g .
c. Select for the new method from the Method drop-down.
Authentication methods are attempted in the order they are listed until the first successful
authentication result is returned. See
Rearrange the position of authentication methods for
information about rearranging the position of the methods in the list.
9. Click Apply to save the configuration and apply the change.
Command line
1. Log into the AnywhereUSB Plus command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu . Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. (Optional) Prevent other authentication methods from being used if authentication
fails. Other authentication methods will only be used if the server is unavailable.
(config)> auth authoritative true
(config)>
4. (Optional) Configure the group_attribute. This is the name of the attribute used in the
server's configuration to identify the AnywhereUSB Plus authentication group or groups that
the user is a member of. For example, in
user configuration , the group attribute in the
sample tac_plus.conf file is groupname , which is also the default setting for the group_
attribute in the AnywhereUSB Plus configuration.
(config)> auth group_attribute attribute-name
(config)>