Digi AnywhereUSB Plus, Руководство пользователя, Страница: 131 / 815

Interfaces Wide Area Networks (WANs)
AnywhereUSB® Plus User Guide 131
1. Log into the AnywhereUSB Plus WebUI as a user with full Admin access rights.
2. On the menu, click System . Under Configuration , click Device Configuration .
The Configuration window is displayed.
3. Configure active recovery on ETH1 :
a. Click Network > Interface > ETH1 > IPv4 > SureLink .
b. For Interval , type 10s .
c. Click to expand Test targets .
d. Delete the existing test targets:
Click the menu icon (... ) next to each target and select Delete .
e. For Add Test Target , click g .
f. For Test type , select Ping test .
g. For Ping host , type 43.66.93.111 .
h. For Ping payload size , type 256 .
4. Repeat the above step for Modem to enable SureLink on that interface.
5. Click Apply to save the configuration and apply the change.