Digi AnywhereUSB Plus Скачать руководство пользователя страница 239

Страница: 239 / 815

Services

Configure DNS

AnywhereUSB® Plus User Guide

239

A single IP address or host name.

A network designation in CIDR notation, for example, 2001:db8::/48.

any

: No limit to IPv6 addresses that can access the DNS service.

d. Click

again to list additional IP addresses or networks.

To limit access to hosts connected through a specified interface on the AnywhereUSB
Plus device:

a. Click

Interfaces

b. For

Add Interface

, click

c. For

Interface

, select the appropriate interface from the dropdown.

d. Click

again to allow access through additional interfaces.

To limit access based on firewall zones:

a. Click

Zones

b. For

Add Zone

, click

c. For

Zone

, select the appropriate firewall zone from the dropdown.

See

Firewall configuration

for information about firewall zones.

d. Click

again to allow access through additional firewall zones.

5. (Optional)

Cache negative responses

is enabled by default. Disabling this option may improve

performance on networks with transient DNS results, when one or more DNS servers may have
positive results. To disable, click

Cache negative responses

6. (Optional)

Query all servers

is enabled by default. This option is useful when only some DNS

servers will be able to resolve hostnames. To disable, click

Query all servers

7. (Optional)

Rebind protection

, if enabled, prevents upstream DNS servers from returning

private IP addresses. To enable, click

Rebind protection

8. (Optional)

Allow localhost rebinding

is enabled by default if

Rebind protection

is enabled.

This is useful for Real-time Black List (RBL) servers.

9. (Optional) To add additional DNS servers:

a. Click

DNS servers

b. For

Add Server

, click

c. (Optional) Enter a label for the DNS server.

d. For

DNS server

, enter the IP address of the DNS server.

Domain

restricts the device's use of this DNS server based on the domain. If no domain are

listed, then all queries may be sent to this server.

10. (Optional) To add host names and their IP addresses that the device's DNS server will resolve:

a. Click

Additional DNS hostnames

b. For

Add Host

, click

c. Type the

IP address

of the host.

d. For

Name

, type the hostname.

11. Click

Apply

to save the configuration and apply the change.

Содержание AnywhereUSB Plus
















































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание AnywhereUSB Plus

Отзывы:

Digi AnywhereUSB Plus, Руководство пользователя, Страница: 239 / 815

Результаты поиска

Содержание AnywhereUSB Plus

Отзывы: