Digi AnywhereUSB Plus, Руководство пользователя, Страница: 137 / 815

Interfaces Wide Area Networks (WANs)
AnywhereUSB® Plus User Guide 137
11. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu . Type quit to disconnect from the device.
Configure cellular modem APNs
The AnywhereUSB Plus device uses a preconfigured list of Access Point Names (APNs) when
attempting to connect to a cellular carrier for the first time. After the device has successfully
connected, it will remember the correct APN. As a result, it is generally not necessary to configure
APNs. However, you can configure the system to use a specified APN.
To configure the APN:
É
WebUI
1. Log into the AnywhereUSB Plus WebUI as a user with full Admin access rights.
2. On the menu, click System . Under Configuration , click Device Configuration .
The Configuration window is displayed.
3. Click Network > Interfaces > Modem > APN list > APN .
4. For APN , type the Access Point Name (APN) to be used when connecting to the cellular carrier.
5. (Optional) IP version :
For IP version , select one of the following:
n
Automatic : Requests both IPv4 and IPv6 address.
n
IPv4 : Requests only an IPv4 address.
n
IPv6 : Requests only an IPv6 address.
The default is Automatic .
6. (Optional) Authentication method :
For Authentication method , select one of the following:
n
None : No authentication is required.
n Automatic : The device will attempt to connect using CHAP first, and then PAP.
n
CHAP : Uses the Challenge Handshake Authentication Profile (CHAP) to authenticate.
n
PAP : Uses the Password Authentication Profile (PAP) to authenticate.