Digi AnywhereUSB Plus, Руководство пользователя, Страница: 300 / 815

Services Use the iPerf service
AnywhereUSB® Plus User Guide 300
To enable the iPerf3 server:
É
WebUI
1. Log into the AnywhereUSB Plus WebUI as a user with full Admin access rights.
2. On the menu, click System . Under Configuration , click Device Configuration .
The Configuration window is displayed.
3. Click Services > iPerf .
4. Click Enable .
5. (Optional) For IPerf Server Port , type the appropriate port number for the iPerf server
listening port.
6. (Optional) Click to expand Access control list to restrict access to the iPerf server:
n
To limit access to specified IPv4 addresses and networks:
a. Click IPv4 Addresses .
b. For Add Address , click g .
c. For Address , enter the IPv4 address or network that can access the device's iperf
service. Allowed values are:
l
A single IP address or host name.
l
A network designation in CIDR notation, for example, 192.168.1.0/24.
l
any : No limit to IPv4 addresses that can access the iperf service.
d. Click
g
again to list additional IP addresses or networks.
n
To limit access to specified IPv6 addresses and networks:
a. Click IPv6 Addresses .
b. For Add Address , click g .
c. For Address , enter the IPv6 address or network that can access the device's iperf
service. Allowed values are:
l
A single IP address or host name.
l
A network designation in CIDR notation, for example, 2001:db8::/48.
l
any : No limit to IPv6 addresses that can access the iperf service.
d. Click
g
again to list additional IP addresses or networks.
n
To limit access to hosts connected through a specified interface on the AnywhereUSB
Plus device:
a. Click Interfaces .
b. For Add Interface , click
g
.
c. For Interface , select the appropriate interface from the dropdown.
d. Click g again to allow access through additional interfaces.