Digi AnywhereUSB Plus, Руководство пользователя, Страница: 316 / 815

User authentication User authentication methods
AnywhereUSB® Plus User Guide 316
1. Log into the AnywhereUSB Plus WebUI as a user with full Admin access rights.
2. On the menu, click System . Under Configuration , click Device Configuration .
The Configuration window is displayed.
3. Click to expand the first Method .
4. In the Method drop-down, select RADIUS .
5. Click to expand the second Method .
6. In the Method drop-down, select Local users .
7. Click Apply to save the configuration and apply the change.
Command line
1. Log into the AnywhereUSB Plus command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu . Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. Use the show command to display current configuration:
(config)> show auth method
0 local
1 radius
(config)>
4. Use the move command to rearrange the methods:
(config)> move auth method 1 0
(config)>