Digi AnywhereUSB Plus, Руководство пользователя, Страница: 259 / 815

Services Location information
AnywhereUSB® Plus User Guide 259
Type ... firewall zone ? at the config prompt:
(config)> ... firewall zone ?
Zones: A list of groups of network interfaces that can be
referred to by packet
filtering rules and access control lists.
Additional Configuration
--------------------------------------------------------
-----------------------
any
dynamic_routes
edge
external
internal
ipsec
loopback
setup
(config)>
Repeat this step to list additional firewall zones.
8. 1. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
2. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu . Type quit to disconnect from the device.
Forward location information to a remote host
You can configure location clients on the AnywhereUSB Plus device that forward location messages in
either NMEA or TAIP format to a remote host.
Required configuration items
n
Enable the location service.
n
The hostname or IP address of the remote host to which the location messages will be
forwarded.
n
The communication protocol, either TCP or UDP.
n
The destination port on the remote host to which the messages will be forwarded.
n
Message protocol type of the messages being forwarded, either NMEA or TAIP.