Digga Magnum II Series, Руководство оператора и каталог запасных частей

Страница: 22 / 56

22
BYSTANDERS OR OTHER PERSONNEL PRESENT. FLYING DEBRIS FROM THE
FRONT OR REAR OF THE MACHINE IS POSSIBLE EVEN IF THE DEFLECTOR
DOOR IS CLOSED.
The deflector door can be open or closed when operating in either direction. However, we recommend
that the door be open when operating in a forward motion with the mulcher engaged. This will prevent
brush or standing trees from pushing on the deflector door and bending it in towards the rotor and
therefore causing damage to the door and/or teeth. When traveling in reverse we recommend closing
the deflector door to direct the debris and mulch down to the ground and produce a smooth clean
looking finished product. Ultimately, safety is the responsibility of the operator and he should be aware
of his surroundings at all times.
HYDRAULIC PRESSURE SITE GAUGE
The hydraulic pressure gauge on the skid steer loader and the combination models is visible from the
operator’s seat and will show the operator what the hydraulic system pressure is during operation of
the mulcher. Each prime mover has a different maximum operating pressure and the operator should
know what that is prior to operating the mulcher. As the gauge approaches the maximum pressure the
operator should slow down the ground speed or raise the mulcher slightly so the unit is not operating at
maximum operating pressure for an extended amount of time. Running the mulcher at maximum
pressure levels can shorten the life of the hydraulic components. Operating the unit slightly below
maximum pressure will create less heat and allow for better productivity and more efficient operation.
OPERATION
PUSH OVER BAR
The push over bar is standard from the factory on all units except for the excavator models. The push
over bar is used for pushing over brush, saplings and standing trees. When mulching the larger
standing trees, you may need to tilt the mulcher back slightly to prevent bending of the push over bar
as the mulcher progresses through the tree. Although the push over bar should never need adjusting,
some operator’s prefer to move the push over bar to the front position when mulching strictly brush and
small saplings. The push over bar is easily adjusted by removing the two bolts at the back mounting
ears. Move the bar to the desired location and reinstall the bolts. Torque to 250 ft. lbs.
HYDRAULIC DEFLECTOR DOOR
The hydraulic deflector door is used on all mulchers except when operating on an excavator. The
deflector door is operated using the optional electrical control box, your skid steer loaders in-cab
electrical controls . The deflector door is designed to deflect debris and mulched material towards the
ground. Extreme caution should be used when operating this attachment and should never be used
with bystanders or any other personnel present.
DANGER! TO PREVENT PERSONAL INJURY OR DEATH. DO NOT OPERATE WITH
PM-000102-A OCTOBER 2017 21