aCTIVaTIon
EN
DiBO 27
7
Control Screen 3 (Engine speed setting - optional)
In this screen you can set the desired engine speed. The basic setting at
the start is set at 50%. Move the control stick upwards (increase speed) or
downwards (lower speed) below to set the desired engine speed. Increase/
decrease in steps of 10%. Minimum value 0% - maximum value 100%.
at the top right, the current pressure is visualized.
Pay attention: If the key contact is put into position “ON” , the engine
speed is not adjustable. Start the key contact by before the engine
speed is adjustable!
.
8
Control Screen 4 (Lighting - optional)
In this screen you can set the lighting. Move the control stick upwards (work
light on/off) or downwards (beacon light on/off) to set the desired condition.
push the control stick to activate, push again to deactivate.
9
Control Screen 5 (Filling pump - optional)
In this screen you can turn on / off the filling pump.
Move the control stick upwards (turn on) or downwards (turn off).
10
Failures
The screen includes a number of failures like indicated on this page. When
service is necessary, also a message will appear. During dry- running of the
water tank, the burner will first turn off, afterwards the machine will shut down
-> cooling down process.
Pay attention: this screen always appear if there will be
switched from position 0 to 1 (via key contact) when the
required service period is necessary. Move the control stick
to the left to remove the message from the display.
