EN
aCTIVaTIon
DiBO 24
6 HIGH PRESSURE HOSE WITH SPRAY GUN
The high pressure hose is coupled rotated on the spray gun. also assemble
(tighten) the lance to the spray gun. Because of that you obtain a high degree of
free movement during the spraying activities.
Check regularly, during spraying activities, whether the
lance coupling is still fixed to the spray gun.
Spray gun
• Do not spray: release the lever in the handle.
• Spraying: push the lever in the handle.
• Spray security: release the blocking pawl in the handle.
The machine is standard equipped with a single lance. When changing the
spraying tool, always turn off the cleaner first!
7 CONTROL CAP
The control cap consists of pE and could be opened/closed easily by means of
two locks. keep the cover cap closed when starting the spray activities (when
engine is working).
Pay attention: make sure the cap can close properly in the closing
mechanism before you drive on the road with the JMB-M.
Please also note: open the fall rail protection (as indicated below)
from the gas spring each time before you want to close the cap!
8 THROTTLE LEVER
The throttle lever is carried out as a slide valve. This lever has variable positions
where you can set the number of revolutions and therefore also the working
pressure:
• lever to the left : less revolutions and working pressure.
• lever to the right : more revolutions and working pressure.
• lever to the middle (option): engine speed for ‘high temperature function’ if
activated by the ‘high temperature function’ valve.
For info: the throttle lever is included at every standard configuration unless you
have the option automatic speed control!
9 WORKING LIGHT / FLASHING BEACON (OPTION)
The working light is mounted on the side of the operating part of the trailer, the
flashing beacon is mounted on top of the protective cap.
Both lights can be turned on / off via the control panel display.
Note: do not turn on the working light / flashing
light while driving on public roads!
