Diatron Abacus + Скачать руководство пользователя страница 64

Страница: 64 / 97

Diatron MI PLC

rev 1.09

7.1. Error codes

%s: filename concerned, %d: error type concerned, %u: error specific string

7.1.1. Software/system errors

Code

Message

Reason(s)

Remedy

1001

Error %d on opening file

Fatal system or

program error!

The same as in case of error

1000.

1002

Cannot create file %s

Fatal system or

program error!

The same as in case of error

1000.

1003

Data file %s is corrupt,

new will be created, all

stored measure data will

be lost

Stored data file is

corrupt or missing!

Disk or software

error.

New stored data file will be

created automatically (by User

confirmation).

1004

Error %d on indexing file

Fatal system or

program error!

The same as in case of error

1000.

7.1.2. Pneumatic errors

Code

Message

Reason(s)

Remedy

1100

Fatal pressure error.

Power off the system!

Cannot make the

measuring vacuum!!

Check the pump and the tubes,

fittings and valves around the

puffer reservoir.

1101

Waste is full!
Empty waste container!

The system assumes that

you will do it before going

on!

Waste container is

full!

Empty waste container!

1102

Check Diluent container!

Diluent reagent con-

tainer become empty,

or one of the diluent

fluid sensor is too

sensitive or there are

a lot of bubbles in the

diluent tubes!

Replace the Diluent reagent

container with a filled one.

If this error still remains with a

filled diluent reagent container,

calibrate sensors, and check the

tubings and the fittings.

1103

Check Lyse container!

Lyse reagent

containner become

empty, or the lyse

fluid sensor is too

sensitive or there are

lot of bubbles in the

lyse tubes!

Replace the Lyse reagent

container with a filled one.

If this error still remains with a

filled lyse reagent container,

calibrate sensors and check the

tubings and the fittings.

Содержание Abacus +


































































































Результаты поиска

Содержание Abacus +

Отзывы:

Бренды по названию

Популярные бренды

Diatron Abacus +, Руководство по обслуживанию

Результаты поиска

Содержание Abacus +

Отзывы:

Бренды по названию

Популярные бренды