31
DHOLLANDIA
12
ELECTRICAL INSTALLATION
12.1
INSTALLATION OF THE (+) BATTERY CABLE AND (-) GROUND CABLE
NOTICE
•
APPENDIX 19.3 on page 52 provides important information on
battery sizes
and
cable sizes
. Make sure you comply with the
minimum electrical requirements in that appendix.
•
Insufficient torquing of the (+) positive and (-) connections on the electric motor can cause overheating and short circuits. Make
sure the connections of the (+) positive battery cable to the (+) positive motor terminal and the (-) negative ground cable to the (-
) negative motor terminal are fastened with the prescribed torque.
•
To ensure the reliability of the lift over many years after installation, check and make sure the cables pass through the back plate
of the pump unit, are properly mounted, and will seal the inside of the pump.
•
DHOLLANDIA disclaims liability for any personal injury or property damage that results from improper or negligent installation.
1
(+) battery cable
5
Motor solenoid
2
(-) ground cable
6
Electric motor
3
12V or 24V battery
7
Cabin switch
4
Main fuse or circuit breaker
8
Toggle switch
