15
DHOLLANDIA
7.1
REAR SILL CUT
•
Check the illustrations below to verify if a rear sill cut will be needed.
•
The standard 12” bed
extension (option OAM051) will have cut outs to accommodate any rear sill cut required.
RPH-33
–
bed heights 41
” –
49
”
RPH-33
–
bed heights 44
” –
52
”
NOTICE
•
The notching angle required for the rear sill is subject to change depending on the depth of the rear sill on the vehicle. Forsee a
suitable depth and angle for this cut to allow the lift to stow properly in the closed position.
•
Where chassis beams, longs
sills, the rear sill and other steel chassis or body components have been cut, grinded, drilled, etc…,
the installer should apply adequate anti-corrosive coating to protect the vehicle and body against corrosion. Check, and make
sure you comply with the instructions of the OEM vehicle manufacturer.
