17
DHOLLANDIA
•
The bed extension may also be welded to the rear sill as shown below.
•
Tack weld the bed extension, working from the center outward, making leveling adjustments as needed.
•
Finish with 12 welds of
3
16
” (5
mm), 2
” (
50 mm) long on the top and bottom.
•
DO NOT weld in the areas left and right, where the steps and dock bumpers will be bolted on.
CAUTION
•
Before welding, note that welding on galvanized parts releases hazardous fumes. Provide adequate ventilation,
and war an appropriate toxic fume rated welding respirator.
•
It is strongly recommended to first grind off the galvanizing in areas where welding is to be done.
