19
DHOLLANDIA
•
Mount the mount plates on the lift frame and tighten the bolts by hand.
•
Each mount plate is bolted to the lift frame as depicted below.
•
Fit the mount plates over the frame.
•
The mount plates can be moved inwards / outwards to align
them with varying chassis widths
chw
.
•
The configuration illustrated below is replicated on both L / R
sides of the lift frame.
•
It is best to get these bolts hand-tightened at this phase, then
torque them properly prior to welding / bolting to the vehicle
chassis.
•
Note: a small bag contained in the parts sack will have the
required hardware to complete this step, along with a small
graphic showing assembly.
•
The graphic below shows how the mount plates can be positioned to accommodate slightly different
chw
chassis widths.
•
The RPH* will come by default with the mount plates bolted to the shipping skid.
