DFI LanParty UT NF590 SLI-M2R/G, Руководство пользователя

Страница: 92 / 162

9 2
3
BIOS Setup
Power Management
This field allows you to select the type (or degree) of power saving
by changing the length of idle time that elapses before the “HDD
Power Down” field is activated.
Min Saving Minimum power saving time for the “HDD Power
Down” = 15 min.
Max Saving Maximum power saving time for the “HDD Power
Down” = 1 min.
User Define Allows you to set the power saving time in the
“HDD Power Down” field.
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC + Blank This selection will cause the system to turn
off the vertical and horizontal synchroniza-
tion ports and write blanks to the video
buffer.
Blank Screen This option only writes blanks to the video
buffer.
DPMS Support Initializes display power management
signaling. Use this option if your video
board supports it.
HDD Power Down
This is selectable only when the Power Management field is set to
User Define. When the system enters the HDD Power Down mode
according to the power saving time selected, the hard disk drive will
be powered down while all other devices remain active.
HDD Down In Suspend
The default setting is Disabled. When enabled, the hard drive will be
powered off once the system enters the Suspend mode.