manualshive.com logo in svg

DFI LanParty UT NF590 SLI-M2R/G, Руководство пользователя, Страница: 143 / 162

Поделиться
Скачать
DFI LanParty UT NF590 SLI-M2R/G Скачать руководство пользователя страница 143

143

4

Supported Software

USB 2.0 Drivers

Windows

®

 XP

If your Windows

®

 XP CD already includes Service Pack 1, the USB

2.0 driver will automatically install when you install the operating sys-
tem. If the CD does not include Service Pack 1, it is available for
download at Microsoft’s Windows Update website.

Windows

®

 2000

If your Windows

®

 2000 CD already includes Service Pack 4, the

USB 2.0 driver will automatically install when you install the operating
system. If the CD does not include Service Pack 4, it is available for
download at Microsoft’s Windows Update website.

Installation Notes

1. "Autorun" ONLY supports the Windows

 2000, Windows NT

4.0 and Windows

 XP operating systems. If after inserting the

CD, "Autorun" did not automatically start (which is, the Main
Board Utility CD screen did not appear), please go directly to
the root directory of the CD and double-click "Setup".

2. All steps or procedures to install software drivers are subject to

change without notice as the softwares are occassionally updated.
Please go to DFI's web site at "http://www.dfi.com/support1/
download2.asp" for the latest version of the drivers or software
applications.

Содержание LanParty UT NF590 SLI-M2R/G



































































































































































Отзывы:

Нет отзывов