DFI LanParty UT NF590 SLI-M2R/G, Руководство пользователя

Страница: 89 / 162

8 9
3
BIOS Setup
Power On Function
This field allows you to use the keyboard or PS/2 mouse to power-
on the system.
Button only Default setting. Uses the power button to
power on the system.
Password When this option is selected, set the password
you would like to use to power-on the system in
the “KB Power On Password” field.
Hot Key When this option is selected, select the function
key you would like to use to power-on the sys-
tem in the “Hot Key Power On” field.
Mouse Move Move the PS/2 mouse to wake up the system.
Mouse Click Click the PS/2 mouse to wake up the system.
Any Key Press any key to power-on the system.
Keyboard 98 When this option is selected, press the “wake
up” key of the Windows
® ® ® ® ®
98 compatible key-
board to power-on the system.
KB Power On Password
Move the cursor to this field and press <Enter>. Enter your password.
You can enter up to 5 characters. Type in exactly the same password to
confirm, then press <Enter>.
The power button will not function once a keyboard password has
been set in this field. You must type the correct password to power-on
the system. If you forgot the password, power-off the system and remove
the battery. Wait for a few seconds and install it back before powering-
on the system.
Hot Key Power On
This field is used to select a function key that you would like to use to
power-on the system.
Onboard FDC Controller
Enabled Enables the onboard floppy disk controller.
Disabled Disables the onboard floppy disk controller.