DFI LanParty UT NF590 SLI-M2R/G, Руководство пользователя

Страница: 90 / 162

9 0
3
BIOS Setup
Onboard Serial Port
Auto The system will automatically select an I/O address for
the onboard serial port.
3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3 Allows you to manually
select an I/O address for the onboard serial por t.
Disabled Disables the onboard serial port.
Onboard IRDA Select
Auto Automatically detects the IrDA device.
Disabled Disables the onboard IrDA.
IR Mode Select
This field is used to select the type of IrDA standard supported by
your IrDA device. For better transmission of data, your IrDA periph-
eral device must be within a 30o angle and within a distance of 1
meter.
UR2 Duplex Mode
Half Data is completely transmitted before receiving data.
Full Transmits and receives data simultaneously.
CIR Port Address
This field is used to select an I/O address for the CIR device.
CIR Port IRQ
This field is used to select an IRQ for the CIR device.