DFI LanParty UT NF590 SLI-M2R/G Скачать руководство пользователя страница 48

Страница: 48 / 162

Hardware Installation

Uninstalling the Karajan Audio Module

The Karajan audio module is snapped through the system board via
the module holder. Pull the Karajan audio module upward. The mod-
ule holder will at the same time detach from the system board.

Karajan Audio Jacks

•

Line-in (Light Blue)

This jack is used to connect any audio devices such as Hi-fi set,
CD player, tape player, AM/FM radio tuner, synthesizer, etc.

•

Front Right/Left Jack - Line-out (Lime)

This jack is used to connect to the front right and front left
speakers of the audio system.

•

Mic-in Jack (Pink)

This jack is used to connect an external microphone.

•

Center/Subwoofer Jack (Orange)

This jack is used to connect to the center and subwoofer
speakers of the audio system.

•

Rear Right/Left Jack (Black)

This jack is used to connect to the rear right and rear left
speakers of the audio system.

•

Side Right/Left Jack (Gray)

This jack is used to connect to the side left and side right
speakers of the audio system.

Note:

The illustrations in this section are for reference only. The color
of the module holder may differ from the actual one.

Содержание LanParty UT NF590 SLI-M2R/G



































































































































































Результаты поиска

Содержание LanParty UT NF590 SLI-M2R/G

Отзывы:

Похожие инструкции для LanParty UT NF590 SLI-M2R/G

Бренды по названию

Популярные бренды

DFI LanParty UT NF590 SLI-M2R/G, Руководство пользователя

Результаты поиска

Содержание LanParty UT NF590 SLI-M2R/G

Отзывы:

Похожие инструкции для LanParty UT NF590 SLI-M2R/G

Бренды по названию

Популярные бренды