Develop ineo 3300P Скачать руководство пользователя

Страница: 144 / 242

User's Guide

- 144 -

Non-Printer Manufacturer cartridge, see User’s Guide [33.xy]

- Blinking

- On

If the printer control panel light sequence matches the light sequence in the preceding illustration, then

the printer has detected a non-Printer Manufacturer supply or part installed in the printer.

Your printer is designed to function best with genuine Printer Manufacturer supplies and parts. Use of

third-party supplies or parts may affect the performance, reliability, or life of the printer and its imaging

components.

Warning—Potential Damage:

Use of third-party supplies or parts may affect warranty coverage.

Damage caused by the use of third-party supplies or parts are not covered by the warranty.

All life indicators are designed to function with genuine Printer Manufacturer supplies and parts, and may

deliver unpredictable results if third-party supplies or parts are used. Imaging component usage beyond

the intended life may damage your printer or associated components.

To accept any and all of these risks and to proceed with the use of non-genuine supplies or parts in your

printer, press

and

simultaneously for at least three seconds to clear the light sequence.

Note:

For the list of supported supplies, see the “Ordering supplies” section of the

User's Guide

Содержание ineo 3300P



















































































































































































































































Результаты поиска

Содержание ineo 3300P

Отзывы:

Похожие инструкции для ineo 3300P

Бренды по названию

Популярные бренды

Develop ineo 3300P, Руководство пользователя

Результаты поиска

Содержание ineo 3300P

Отзывы:

Похожие инструкции для ineo 3300P

Бренды по названию

Популярные бренды