Derbi ATV DXR 200, Руководство по ремонту

Страница: 83 / 194

82
4-6. S
TARTER
M
OTOR
/G
ENERATOR
/L. C
RANKCASE
C
OVER
/ S
TARTER
C
LUTCH
/C
AMSHAFT
NOTE
SERVICE INFORMATION
CAUTION
1. DO NOT INSTALL THE STARTER CLUTCH BY FORCE.
2. INSTALL THE GENERATOR BY ALIGNING THE GROOVE IN THE FLYWHEEL WITH THE KEY ON THE
CRANKSHAFT.
3. INSTALL THE STARTER MOTOR REDUCTION GEAR SHAFT BY ALIGNING THE SHAFT PIN WITH THE SEAT
GROOVE.
4. THE TORQUE VALUES OF FLYWHEEL LOCK BOLT: 0.8 - 1.2 KGM
5. THE SPECIAL TOOLS:
1).
FLYWHEEL HOLDER;
2). FLYWHEEL PULLER
NOTE
PROBLEMS SHOOTING:
<Q-A> Poor performance at high speed and starting?
- improperly tightened flywheel lock bolt
<Q-A> Starter clutch slips?
- worn starter clutch roller
- faulty starter clutch roller or spring
- worn starter gear shaft O.D.
<Q-A> Starring noise?
- worn reduction gear
- worn starter gear
- worn starter clutch roller
- faulty reduction pinion shaft bearing
STANDARD (MM) 125/150 ITEMS
9,972 - 9,987
10,031 - 10.056
9,973 - 9,984
10,19 - 10,205
10,031 - 10,056
22,021 - 22,042
01. Reduction pinion:
shaft
O.D.
02. Reduction pinion:
shaft hole I.D.
03. Reduction gear:
shaft
O.D-
04. Reduction gear:
shaft hole I.D.
05. Roller O.D.
06. Starter gear I.D. :
07. Starter gear O.D. :
54,175 - 54,2
SERVICE LIMIT (MM)125/150
10,15 or less
9,926 or less
10,096 or more
9,932 or less
10,096 or more
22,081 or more
54,135 or less