Derbi ATV DXR 200, Руководство по ремонту

Страница: 44 / 194

43
3-24. W
HEEL REMOVAL AND RE
-
INSTALLATION
(F
IG
. 3-42, 3 -42)
3-24-1. Removal
01. Elevate the wheel by placing a suitable stand under frame.
02. Remove the nuts from the wheel.
03. Remove the wheel assembly.
3-24-2. Installation
When installing the wheels, reverse the removal procedure. Tighten. the wheel nuts to the specified torque.
Wheel nut torque:
Front:
45 Nm (4,5 Kg.-m, 32 ft*lb);
Rear: 45 Nm (4,5 Kg.-m, 32 ft*lb)
3-25. R
EPLACING THE HEADLIGHT
(F
IG
. 3-43, 3-44, 3-45, 3-46)
It the headlight bulb burns out, be sure to replace the new bulb.
01. Remove the front cover (1) Fig. 3-44.
02. Take out bulb (2) from bulb holder and remove defective bulb.
03. Put a new bulb and secure it in place with the bulb holder.
34. Reinstall the front cover.
WARNING
POTENTIAL HAZARD: THE HEADLIGHT BULB IS HOT WHEN IT IS ON AND IMEDIATELY AFTER IT IS TURNED
OFF.
AWARENESS
People can be burned, or a fire could stare if the bulb touches something flammable
SOLUTION
Wait for the bulb to cool before couching or removing it.
3-26. R
EPLACING THE REAR LIGHT
(F
IG
. 3-47, 3-48)
If the rear-light bulb burns out, be sure co replace the new bulb.
01. Remove the rear light cover (1) Fig. 3-47
02. Take out bulb (2) from bulb holder and remove defective bulb.
03. Put a new bulb and secure it in place with the bulb holder.
04. Reinstall the light: cover.
3-27. B
ATTERY
-
CHARGING SYSTEM
(F
IG
. 3-49)
Be sure to keep the battery capacity. If not enough capacity please re-charge or replace a new battery.
CAUTION
THE BATTERY IS A MF (MAINTENANCE FREE) TYPE WHICH IS UNNECESSARY TO BE REFILLED DISTILLED WATER.
DO NOT QUICK CHARGE THE BATTERY. ONLY USE A MF BATTERY CHARGER AND BATTERY TEMPERATURE
SHOULD NOT EXCEED 45C. REMOVE THE BATTERY FROM THE ATV WHEN RE-CHARGING.