Derbi ATV DXR 200, Руководство по ремонту

Страница: 176 / 194

175
6-5-2. Main switch inspection
01. the main switch (1) (Fig. 6-51)
02. check the ON (Fig. 6-52)
03. check the NO 2 (Fig. 6-53)
NOTE
1. ON 1: ENGINE CAN BE STARTED AT THIS POSITION.
2. ON 2: ENGINE CAN BE STARTED AT THIS POSITION AND THE HEADLIGHT AND TAILLIGHT
COME ON AT THE SAME TIME.
3. OFF: ALL ELECTRICAL CIRCUITS ARE SWITCHED OFF. THE KEY CAN BE REMOVED IN THIS
POSITION.
6-5-3. Handlebar switches (1) (Fig. 6-54)
01. check the start button (2) (Fig. 6-55)
02. check the engine stop switch (3) (Fig. 6-56)
03- check the Hi/Lo beam switch (4) (Fig. 6-57)
NOTE
“LO” POSITION IS FOR LOW BEAM AND FCAILLIGHT. “HI” POSITION IS FOR HIGH BEAM AND
TAILLIGHT.
CAUTION
DO NOT PUSH STARTER BUTTON MORE THAN FOUR SECONDS EACH TIME, WHICH WILL CAUSE THE
STARTER OVERHEAT AND DAMAGE THE STARTER. DURING ENGINE RUNNING, DO NOT PRESS STARTER
BUTTON TO AVOID STARTER & ENGINE DAMAGE.
NOTE
(OPTION) THE STOP LIGHT, L & R SINGLE LIGHT, FLASHER, ... ARE THE DEVICES FOR CERTAIN AREA
REGULATION -- DETAILS REFER TO EACH AREA IMPORTER.