0
Get
ting Star
ted
Connections
Set
tin
g
s
Pla
ybac
k
Remot
e Contr
ol
Multi-z
one
Inf
or
mation
Tr
oubleshooting
Specifications
Set
tin
g
s
Main remote control unit
operation buttons
:Displaying the menu
Cancel the menu
:Moves the cursor
(Up/Down/Left/Right)
:Confirm the setting
:Return to previous menu
Making Detailed Settings (Manual Setup)
Steps for setting “Amp Assign”
Item 1 : “Configuration” settings
Select MAIN ZONE channel configuration.
5.1ch
7.1ch
9.1ch
11.1ch
Item 2 : “Extra Channel” settings
Select the channels to be used from among surround back speakers (SB), front
height speakers (FH), front wide speakers (FW).
SB
FH
FW
SB/FH
SB/FW
FH/FW
5.1ch
5.1ch+SB
5.1ch+FW
5.1ch+SB+FW
5.1ch+SB+FH+FW
5.1ch+FH
5.1ch+SB+FH
5.1ch+FH+FW
Item 3 : “Assign Mode” settings
Select power amp usage method.
NORMAL
+Z2
+Z2+Z3
ALL Z2
ALL Z2+Z3
FREE
Item 4 : “Front” settings
Select front speaker connection method.
NORMAL
Bi-AMP
Bi-WIRING
2CH BW
2CH BA
n
Determine the maximum number of channels used by the AVR-4810CI.
Perform the settings for each speaker using “Speaker Configuration” (
v
page 41).
Set channels assigned
to power amps
(
v
page 40).
“Free Assign” settings
It is possible to freely select the signal being output from each speaker terminal (except for “Bi-Wir./Bi-
Amp”, “ZONE2”, “ZONE3”) when “Assign Mode” is set to “FREE”.
In the screen below, press
ui
to select the speaker terminal, then press
o
p
to select the output
signal.
AMP ASSIGN
[2/2]
FRONT
SB/H/W
CENTER
H/W
SURR.
SW/BA
ZONE2
ZONE3
Config
Extra ch
Assign Mode
11.1ch
SB/FH/(FW)
FREE
TERMINAL
SIGNAL
PRE
RETURN
Return
FRONT
S.BACK
CENTER
HEIGHT
SURR.
---
---
---
F
SB
C
H
S
W
SW
Z2
Z3
Select the signal output from the FRONT terminals
Refer to the chart below for the signals that can be output to each speaker terminal.
Speaker terminal
FRONT
CENTER
SURROUND
S.BACK /
F.HEIGHT /
F.WIDE
F.HEIGHT /
F.WIDE
Signal
FRONT
CENTER
FRONT
FRONT
FRONT
CENTER
S.BACK *1
CENTER
CENTER
CENTER
SURROUND
ZONE2
SURROUND
SURROUND
SURROUND
S.BACK *1
ZONE3
S.BACK *1
S.BACK *1
S.BACK *1
F.HEIGHT *2
– – –
F.HEIGHT *2
F.HEIGHT *2
F.HEIGHT *2
F.WIDE*3
F.WIDE*3
F.WIDE*3
F.WIDE*3
ZONE2
ZONE2
ZONE2
ZONE2
ZONE3
ZONE3
ZONE3
ZONE3
Z2/Z3(MONO)
Z2/Z3(MONO) Z2/Z3(MONO) Z2/Z3(MONO)
– – –
– – –
– – –
– – –
– – – : No channel output
*1 : Can be selected when “SB” is set in “Extra Channel”.
*2 : Can be selected when “FH” is set in “Extra Channel”.
*3 : Can be selected when “FW” is set in “Extra Channel”.
When “Z2/Z3 (MONO)” is selected, ZONE2 and ZONE3 use monaural audio. The ZONE2 mono audio is
output from the speaker terminal’s L ch and the ZONE3 mono audio is output from the R ch.
When selecting “S.BACK” for the center speaker terminal output, set the “Speaker Configuration” –
“Surround Back” (
v
page 41) to “1spkr”.
When selecting “ZONE2” or “ZONE3” for the center speaker terminal, set the “Zone Setup” – “Channel”
(
v
page 52) to “Mono”.
n
•
•
•
See page 41 for details of the settings in “Assign Mode” and “Front”.
