Get
ting Star
ted
Connections
Set
tin
g
s
Pla
ybac
k
Remot
e Contr
ol
Multi-z
one
Inf
or
mation
Tr
oubleshooting
Specifications
Connections
s
Example Installation of Speakers
The AVR-4810CI supports a wide variation of surround playback such as in the example speaker installations
shown below (11.1/9.1/7.1/6.1/5.1ch). It is also possible to have speaker output in rooms other than the
room (MAIN ZONE) where the surround is playing (multi-zone playback), or to enjoy the high quality sound
of the MAIN ZONE front speakers (using bi-wiring/bi-amping). Set “Amp Assign” as appropriate for the
speaker system being used. See page 14 for more information on speaker connections.
Speaker system
Example of speaker installation
“Amp Assign” setting
(
v
page 39 ~ 41)
11.1ch
5.1ch+SB+FH+FW
•
MAIN ZONE
•
Set “Configuration” to “11.1ch”.
b
Use the PRE OUT terminal for the front
wide channel output.
9.1ch
5.1ch+SB+FH
or
5.1ch+SB+FW
or
5.1ch+FH+FW
•
•
•
MAIN ZONE
(Example of 5.1ch+SB+FH
installation)
•
Set “Configuration” to “9.1ch”.
•
Set “Extra Channel (SB/FH/FW)” to be
used.
7.1ch
5.1ch+SB
or
5.1ch+FH
or
5.1ch+FW
•
•
•
MAIN ZONE
(Example of 5.1ch+SB installation)
•
Set “Configuration” to “7.1ch”.
•
Set “Extra Channel (SB/FH/FW)” to be
used.
Installing the Speakers
Example of Speaker Installation in MAIN ZONE
(SB : Surrond Back / FH : Front Height / FW : Front wide)
Multi-zone
speaker
system
Example of speaker installation
“Amp Assign” setting
(
v
page 39 ~ 41)
MAIN ZONE
+
ZONE2
MAIN ZONE
ZONE2
•
Set “Assign Mode” to
“+Z2”.
b
Connect speakers to
the ZONE2 speaker
terminals.
MAIN ZONE
+
ZONE2
+
ZONE3
(Default)
MAIN ZONE
ZONE2
ZONE3
•
Set “Assign Mode” to
“+Z2+Z3”.
b
Connect speakers to
the ZONE2 and ZONE3
speaker terminals.
When using speaker terminals for multi-zone (ZONE2/ZONE3)
Speaker system
Example of speaker installation
“Amp Assign” setting
(
v
page 39 ~ 41)
6.1ch
5.1ch+SB (1 speaker)
•
MAIN ZONE
•
Set “Configuration” to “7.1ch”.
•
Set “Extra Channel” to “SB”.
b
Connect the surround back speaker to
Lch on the S.BACK terminal.
b
In the GUI menu, set “Speaker
Configuration” – “Surround Back” to
“1spkr” (
v
page 41).
5.1ch
MAIN ZONE
•
Set “Configuration” to “5.1ch”.
