Denon AVR-2105, Руководство по эксплуатации

Страница: 25 / 296

25
ENGLISH
Multi-source recording
NOTES:
• Recording sources other than digital inputs
selected in the REC OUT mode are also output to
the multi source audio output jacks.
• Digital signals are not output to the REC
SOURCE or audio output jacks.
• The DIGITAL IN’s signal selected with the
function selector knob are output to the DIGITAL
OUT (OPTICAL) jack.
1
Press the REC SELECT button.
2
With “RECOUT SOURCE”
displayed, turn the FUNCTION
knob to select the source you
wish to record.
VCR -1 -2 V.AUX CDR / TAPE
PHONO CD TUNER DVD / VDP TV / DBS
2
REC
RECOUT SOURCE
1 2, 4 2
REC SELECT
(Main unit)
Playing one source while recording another (REC OUT mode)
FUNCTION
(Main unit)
3
Set the recording mode.
• For operating instructions, refer to the manual
of the component on which you want to record.
4
To cancel, turn the function knob
and select “SOURCE”.
FUNCTION
(Main unit)
Display
11 SURROUND
Before playing with the surround function
• Before playing with the surround function, be sure to use the test tones to adjust the playback level from the
different speakers. This adjustment can be performed with the system setup (see page 11) or from the remote
control unit, as described below.
• Adjusting with the remote control unit using the test tones is only possible in the “Auto” mode and only
effective in the STANDARD (DOLBY/DTS SURROUND) modes. The adjusted levels for the different modes are
automatically stored in the memory.
1
2
Press the TEST TONE
button.
Test tones are output from
the different speakers. Use
the channel volume adjust
buttons to adjust so that
the volume of the test
tones is the same for all
the speakers.
4
After completing the
adjustment, press the
TEST TONE button again.
1
Set the STANDARD (DOLBY/DTS SURROUND)
modes.
STANDARD
(Main unit) (Remote control unit)
3
2, 4
3
1
(Remote control unit)
(Remote control unit)
3
(Remote control unit)
NOTE:
• Please make sure the “AUDIO” position of
the slide switch on the remote control unit.