Denon AVR-2105, Руководство по эксплуатации

Страница: 31 / 296

31
ENGLISH
SELECT
1
Turn the SELECT knob to select the surround
mode.
1, 3 2 1
2
Press the SURROUND PARAMETER button.
Press and hold in the surround parameter button to select the parameter you
want to set.
• The parameters which can be set differ for the different surround modes.
(Refer to “Surround Modes and Parameters” on page 32.
SURROUND
PARAMETER
3
Display the parameter you want to adjust, then turn the SELECT knob to set it.
• Operating the surround mode and surround parameters from the main unit‘s panel.
• When turned clockwise
• When turned counterclockwise
DIRECT STEREO DOLBY PRO LOGIC II x 5CH/7CH STEREO MONO MOVIE
JAZZ CLUB ROCK ARENA VIDEO GAME MATRIX VIRTUAL SURROUND
DTS NEO:6
DIRECT STEREO DOLBY PRO LOGIC
II
x 5CH/7CH STEREO MONO MOVIE
JAZZ CLUB ROCK ARENA VIDEO GAME MATRIX VIRTUAL SURROUND
DTS NEO:6
To select the surround mode while adjusting the surround parameters, tone
defeat or tone control, press the SURROUND MODE button then operate the
selector.
SURROUND
MODE
Surround parameters
e
ROOM SIZE:
This sets the size of the sound field.
There are five settings: “small”, “med.s” (medium-small), “medium”, “med.l” (medium-large) and “large”.
“small” recreates a small sound field, “large” a large sound field.
EFFECT LEVEL:
This sets the strength of the surround effect.
The level can be set in 15 steps from 1 to 15.
DELAY TIME:
In the matrix mode only, the delay time can be set within the range of 0 to 110 ms.
The surround mode switches in the following
order each time the DSP SIMULATION button is
pressed:
MONO MOVIE ROCK ARENA
JAZZ CLUB VIDEO GAME
MATRIX
DSP surround simulation
1 Select the surround mode for the input channel.
2, 3
4 4
1
3
3
5
• To operate the surround mode and surround parameters from the remote control unit.
2
To enter the surround parameter setting mode,
press the SURROUND PARAMETER button.
• The surround parameter switches in the
following order each time the SURROUND
PARAMETER button is pressed for the different
surround modes.
(Remote control unit)
(Remote control unit)
3
(Remote control unit)
Select the various parameters.
4
Adjust the parameter settings.
(Remote control unit)
5
Press the ENTER button to finish surround parameter mode.
(Remote control unit)
(Main unit)
(Main unit)
(Main unit)
NOTE:
• When making parameter settings, the display will return to the regular condition several seconds after the
last button was pressed and the setting will be completed.
NOTE:
• When making parameter settings, the display will return to the regular condition several seconds after the
last button was pressed and the setting will be completed.