Denon AVR-2105, Руководство по эксплуатации

Страница: 17 / 296

17
ENGLISH
5
Press the ENTER or (down) button to enter the setting and switch the
DIGITAL input setting.
6
After completing the adjustment, press the ENTER button.
NOTES:
• When you adjust the channel levels while in the TEST TONE mode, the channel level adjustments made
will affect all surround modes. Consider this mode a Master Channel Level adjustment mode.
• You can adjust the channel levels for each of the following surround modes: DIRECT, STEREO, STANDARD
(DOLBY/DTS SURROUND), 5/7 CH STEREO, MONO MOVIE, ROCK ARENA, JAZZ CLUB, VIDEO GAME,
MATRIX and VIRTUAL.
Setting the Digital In Assignment
• This setting assigns the digital input jacks of the AVR-2105 for the different input sources.
1
Select the digital input jack to be assigned to the
input source.
19 COAX CD
2
• To select the input source
Select “OFF” if nothing is connected.
3
Press the ENTER or (down) button to enter the setting and switch the
Component Video input setting.
NOTE:
• PHONO, TUNER and V. AUX cannot be selected.
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
• To select the digital input jack
Setting the Component In Assignment
• This setting assigns the color difference (component) video input jacks of the AVR-2105 for the different input
sources.
1
Select the component (Y, P
B
/C
B
and P
R
/C
R
) video
input terminal to be assigned to the input source.
23 VIDEO1 DVD
2
• Input source selection
Select “OFF” if nothing is connected.
3
Press the ENTER or (down) button to enter the setting and switch the Auto
Surround Mode setting.
Setting the Auto Surround Mode
For the three kinds of input signals as shown below, the surround mode played the last is stored in the memory.
At next time it the same signal inputs, the memorized surround mode is automatically selected and the signal
is played.
Note that the surround mode setting is also stored separately for the different input function.
SIGNAL Default Auto Surround Mode
q
Analog and PCM 2-channel signals STEREO
w
2-channel signals of Dolby Digital, DTS or other multichannel format Dolby PL
II
x Cinema
e
Multichannel signals of Dolby Digital, DTS or other multichannel format Dolby or DTS Surround
1
Select “ON” if you want to use the auto surround
mode, “OFF” if you do not want to use it.
26 AUTOSURR. ON
2
Press the ENTER or (down) button to switch the Ext. In SW Level setting.
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
• Component video terminal selection