DeLuxe Stitcher IMSHP-A25, Руководство по эксплуатации и обслуживанию

Страница: 48 / 56

the MiniStitcher, along side the Clincher Arm. Make sure the Trip Mode Switch (PG10232),
located on the back of the MiniStitcher, is toggled for Contact Trip use and not Foot Switch use.
Plug the Power Cord (PG10421) into a wall outlet and toggle the Power Switch (PG10228B) to
the on position. Trip the MiniStitcher by inserting the stock to be stitched under the stitcher head
until the stock bumps into the silver Contact Trip Slide and activates the stitcher. If the position of
the stitch has to be adjusted, loosen the Thumb Screws in the Contact Trip Assembly and move it
until the correct position has been achieved. Be sure to tighten the Thumb Screws to secure this
position.
46
!
Always disconnect the power cord before
assembling the MiniStitcher or making any adjustments.

CAUTION
!