DeLuxe Stitcher IMSHP-A25, Руководство по эксплуатации и обслуживанию

Страница: 18 / 56

In time, you will need to replace some parts in your MiniStitcher. When this happens, first locate
the needed part in one of the following diagrams. Then locate the DeLuxe Stitcher part number and
contact your Graphic Arts Representative to order the part by the part number, description and
quantity. Also, be sure to provide the wire size being used in your MiniStitcher.
Ordering Spare Parts
In addition to proper lubrication, routine cleaning is important for the maintenance of your
MiniStitcher. The following areas should be cleaned every three months:
• Swivel Assembly (9038M or 9038A) : remove and wash in an oil-dissolving solvent, dry
and relubricate.
• Swivel Holder (9043B) : clean inside the Swivel hole with an oil-dissolving solvent.
• Swivel Operation Lever and Stud : remove the Swivel Operating Spring (9046A) and
Hub (9163). Clean the Swivel Operating Spring Stud (9129B) and the holes of the Hub,
relubricate and replace.
Note: Use care when replacing the Swivel Operating Hub (9163) as direction is critical and
the Swivel Operating Lever to avoid seriously damaging the head.
• Anywhere that dust, oil or pieces of wire and paper have built up - for example: the Grip,
Clincher Points and around the Wire Straightener Rollers.
Cleaning (Figure 8)
16
!
Always disconnect the power cord
before any maintenance or adjustments are
made to the MiniStitcher

CAUTION
!