DeLuxe Stitcher IMSHP-A25, Руководство по эксплуатации и обслуживанию

Страница: 46 / 56

This heavy duty Floor Stand allows you to
place your MiniStitcher wherever it is needed
and adjusts from 28” to 42”, securely mounting
your MiniStitcher. The Floor Stand Kit comes
complete with easy to follow instructions and all
the parts needed for assembly.
Place the Base Weldment on the floor with the
three screw holes up. Use the Leveling Screw
(P6110) on the bottom right leg to level the Base.
Attach the Post Weldment using the three Screws
(P9132) and Lock Washers (LW12.2) provided.
Place the Slide Weldment over the Post and lock
it into the desired position using the Clamp
Handle (MG10155). To finish, attach the four
(4) Plugs (PG10267) to the
bottom of the Base.
44
Optional Equipment
In addition to the standard features offered with the StitchMaster, optional equipment items can be
purchased to better accommodate your stitching needs. The following kits can be purchased from
your DeLuxe Stitcher Graphic Arts Representative.
FSK1 (Figure 16)
To avoid risk of personal injury never loosen
clamp handle unless load on stand is supported.

WARNING
!
Figure 16 - FSK1 Floor Stand Kit
MG10155
POST
WELDMENT
SLIDE
WELDMENT
P9132
LW12.2
BASE
WELDMENT
P6110
PG10267