DeLuxe Stitcher IMSHP-A25, Руководство по эксплуатации и обслуживанию

Страница: 8 / 56

Assembly (Figure 2)
6
!
Always disconnect the power cord before
assembling the MiniStitcher or making any adjustments.

CAUTION
Assemble the components of the MiniStitcher. Use
Figure 2
for part number reference.
The MiniStitcher mounts on the Table Base (MG10180) and is secured with four (4) Screws
(CB328) through four (4) Lock Washers (LW12.2). The Wire Spool Cradle (MG10113) mounts with
two (2) screws (UA3804.7) on the top of the cover (MG10044B). Use the supplied 1/8” Hex Key
Wrench (PG10293) to remove the screws and then secure the Cradle to the Cover. The Wire Spool
(25G5 or 2125G5) comes assembled on the Spool Shaft (MG10110) which slips into the slots in the
Figure 2 - Assembly
MG10110 25G5 OR 2125G5
MG10113
PG10211
MG10044B
CB328 (4)
PG10293
MG10001A
MG10180
CB889 (4)
UA3804.7 (2)
MG10009A
5160
PG10230
!