33
(Figure 3-16: Leakage Detection Sensor & Connector)
The recommended layout of the leakage detection sensor is shown in
Figure 3-17
.
Method 1
:
Route it around the CoolDoor and rack.
Method 2
:
Place it under the elevated floor.
It can be fixed with suitable non-conductive glue (silicone glue).
NOTE:
The humidity in the lower pipeline might be too high. It is recommended that you
use an insulation cotton to cover the pipeline to avoid false triggering of the leakage
detection sensor due to condensate.
(Figure 3-17: Leakage Detection Sensor Layout)
CoolDoor
The second layout of the
leakage detection sensor
The first layout of the
leakage detection sensor
Elevated floor
