21
3.4
Positioning
After this equipment is relocated to a fixed site, positioning is required in order to ensure that
the cabinet is stable and secure. Depending on installation setting, the following approaches
may be adopted:
3.4.1 Remove the Rack Door Panel
•
If Delta's dedicated rack model MSR1110 is used, you must remove the rear door
before installing the CoolDoor extension frame. Follow the steps below:
1. If the back door is locked, use the attached key to open it.
2. Remove the ground wire, and lift up to remove the two back doors.
3. Remove the 4 door hinge fixing plates and 2 coupling pieces.
(Figure 3-5: Remove Rear Door)
