manualshive.com logo in svg

Dell SC4020, Руководство по развертыванию

Поделиться
Скачать
Dell SC4020 Скачать руководство пользователя страница 9

Provides information about an SC4020 storage system, such as hardware features, replacing 
customer replaceable components, and technical specifications.

•

Dell Storage Center SC4020 Storage System Service Manual

Provides information about an SC4020 storage system, such as hardware features, replacing field 
replaceable components, and technical specifications.

•

Dell Storage Center SC4000 Series Virtual Media Update Instructions

Describes how to update Storage Center software on an SC4000 series storage system using virtual 
media. Updating Storage Center software using the Storage Center Virtual Media option is intended 
for use only by sites that cannot update Storage Center using standard methods.

•

Dell Storage Center Release Notes

Contains information about new features and known and resolved issues for the Storage Center 
software.

•

Dell Storage Center System Manager Administrator’s Guide

Describes the Storage Center System Manager software that manages an individual Storage Center.

•

Dell Storage Center Software Update Guide

Describes how to update Storage Center software from an earlier version to the current version.

•

Dell Storage Center Command Utility Reference Guide

Provides instructions for using the Storage Center Command Utility. The Command Utility provides a 
command-line interface (CLI) to enable management of Storage Center functionality on Windows, 
Linux, Solaris, and AIX platforms.

•

Dell Storage Center Command Set for Windows PowerShell

Provides instructions for getting started with Windows PowerShell cmdlets and scripting objects that 
interact with the Storage Center using the PowerShell interactive shell, scripts, and PowerShell hosting 
applications. Help for individual cmdlets is available online.

•

Dell TechCenter

Provides technical white papers, best practice guides, and frequently asked questions about Dell 
Storage products. Go to 

http://en.community.dell.com/techcenter/storage/

.

9

Содержание SC4020

























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды