Dell SC4020 Скачать руководство пользователя страница 129

Страница: 129 / 184

Port Purpose

Description

• The port is unused.

Front-End Primary

Port is connected to servers and is used for the server I/O path or the port is
connected to another Storage Center and used for replication.

Front-End
Reserved

Port is connected to servers and is used as a failover path.

Back End

Port is connected to an expansion enclosure.

Direct Connect

Port is directly connected to a server.

Configure FC Ports in Virtual Port Mode

Use the

tab to create fault domains and configure the Fibre Channel ports.

About this task

The Startup Wizard displays FC, iSCSI, and SAS tabs for an SC4020 with Fibre Channel front-end ports.

NOTE: The embedded iSCSI ports can be used for replication to another Storage Center or used for

front

‐

end connectivity to host servers.

Steps
1.

Click the

tab.

Figure 115. FC Ports Tab — Virtual Port Mode

Create a fault domain for each FC fabric.
a. Click

Edit Fault Domains

. The wizard displays a list of the currently defined fault domains.

b. Click

Create Fault Domain

. A dialog box opens.

c. In the

Name

field, type a name for the fault domain.

d. From the

Type

drop-down menu, select

e. (Optional) In the

Notes

field, type a description of the fault domain.

f. Click

Continue

. The dialog box displays a summary.

g. Click

Create Now

to create the fault domain.

h. Repeat the previous steps to create additional fault domains as needed.

Set up Storage Center Software

129

Содержание SC4020

























































































































































































Результаты поиска

Содержание SC4020

Отзывы:

Бренды по названию

Популярные бренды

Dell SC4020, Руководство по развертыванию

Результаты поиска

Содержание SC4020

Отзывы:

Бренды по названию

Популярные бренды