Dell PowerVault 750N, Руководство системного администратора

Страница: 69 / 156

System Management
4-3
5
At the System Management menu, click Dell Remote Assistant Setup .
The Dell Remote Assistant Card Setup and Configuration window displays.
6
Click Install DRAC Software .
The Setup/Install Wizard starts. You can install the management software. Ensure
that you use the default install directory (C:\Program Files\DRAC\Host).
7
Reboot your system.
NOTE: Rebooting disconnects the NAS Manager.
8
Repeat steps 1 through 4 after the system has rebooted.
9
Click Configure DRAC Card .
The
Advanced Administration Window
displays. You can edit the configuration file,
apply the configuration, and reset the DRAC. DRAC uses the RacConf utility as
described in the Dell OpenManage Remote Assistant Card User's Guide .
10
Click Edit Config File .
Edit the configuration file and customize the DRAC.
The following is an example of setting information for both user and Internet protocol
(IP) address:
[AdminEntry0]
Administrator Alias =drac
Password =password
[NetConfig]
IpAddr =10.4.1.200
SubnetMask =255.255.0.0
GatewayAddr =0.0.0.0
NOTE:
When you create the username and password, ensure there are no spaces before or
after the username or password.
11
Click Configure .
You can load the configuration file information into the DRAC after the file has been
edited and saved.
After the configuration file has loaded, the user name and password will be
automatically removed from the configuration file as a security precaution.
12
Click Soft Reset .