Dell PowerVault 750N, Руководство системного администратора

Страница: 19 / 156

Introduction
1-5
On a system running Windows 2000, perform the following steps to connect to the NAS
Manager through the Administration port:
1
Connect the serial cable included with your system from the system you are using for
configuration to the administration port (serial port 1) on your system.
2
Click the Start button, point to Settings , and then click Control Panel .
3
In the
Control Panel
, click
Phone and Modem Options
.
4
On the Modems tab, click Add for the Add/Remove Hardware Wizard .
5
Click the
Don't detect my modem; I will select it from a list
checkbox and then click
Next .
6
In the drop-down menu for Manufacturers , click (Standard Modem Types) .
7
In the drop-down menu for Models , click Communications cable between two
computers , and then click Next .
8
Click the Selected ports radio button, select the appropriate communication port
from the list, and then click Next .
9
Click Finish to close the Add/Remove Hardware Wizard , and then click OK to close
the Phone and Modem Options dialog box.
10
On the desktop, right-click
My Network Places
and click
Properties
.
11
In the Properties window, double-click Make New Connection .
The
Network Connection Wizard
displays.
12
Click Next .
13
Select the radio button for Connect Directly To Another Computer and click Next .
14
Select the radio button for
Guest
and click
Next
.
15
In the drop-down menu, click the COM port that you are using and then click Next .
16
Click
Only for myself
and then click
Next
.
17
Enter the name of the connection and then click Finish .
After you configure your direct serial connection, the
Connect Direct Connection
window displays.
18
Click Properties .
19
Click the General tab.
20
Under Select a Device , click Communication cable between two computers .