Dell PowerVault 750N, Руководство системного администратора

Страница: 23 / 156

Introduction
1-9
3
Click Dell OpenManage Kick-Start 2.1 .
A confirmation message that asks whether you want to grant permission for a Java
applet from Dell to access your system.
4
Click Yes or Grant , depending on your browser, to grant permission so you can
complete the remaining configuration tasks.
The
Kick-Start
window appears where you can create, view, and save configurations by
name. You can then apply them to selected NAS appliances that have been discovered
on the network or save the configurations on a diskette or on your local hard-disk drive.
The following procedures explain how to perform these tasks.
Creating Configurations
After you start the Kick-Start utility, you are ready to prepare the configuration information
that you will apply to one or more NAS appliances. This process works the same way,
whether you apply this data using a diskette or using an IP network.
You can save configurations by name and assign them an order within a named set, such as
config001 , config002 , and so on. Also, you can view or edit configurations.
To prepare configuration information, perform the following steps:
1
Double-click Defined Configurations .
2
Click PowerVault NAS Appliance .
3
Click New in the Remote Kick-Start window. The Configurations List changes to
display the Configuration Form .
4
Select or type the following configuration information:
•
Configuration Name — Each configuration file you create must have a name.
Using the
+
(plus) and
–
(minus) buttons beside the name, you can change the
three-digit number that is appended to this name. This number lets you create an
ordered set of configuration files on a diskette. An ordered set of configuration files
on the diskette can be used to apply configurations in sequence to a group of NAS
appliances.
• Time Zone — You can change the time zone by selecting an entry from this list.
This is a required field.
•
Language
— You can change the default system language and locale by selecting a
language in the drop-down list. This is a required field.
NOTE:
This change does not install the Multilanguage User Interface (MUI). To install the
MUI or other languages than those that are listed in the Kick-Start menu, use the
Localization CD.