Dell PowerEdge T30 Скачать руководство пользователя страница 10

Страница: 10 / 107

Figure 2. Front panel features and indicators

Table 2. Front panel features and indicators

Item

Indicator, Button, or Connector

Icon

Description

Power indicator, power button

To turn the system on or off, press the power button.
The indicator on the button indicates if the system is
on or off.

NOTE:

The Power-on indicator is also known

as Power-on LED diagnostic indicator.

NOTE:

To gracefully shut down an ACPI-

compliant operating system, press the power
button.

Optical drive (optional)

One optional slim SATA DVD-ROM drive or DVD +/-
RW drive. For information about the supported optical
drive, see the Technical specifications section.

Microphone connector

Use the Microphone connector to connect a
microphone to the system.

Headphone connector

Use the Headphone connector to connect a
headphone to the system.

USB 3.0 port (2)

Use the USB 3.0 port to connect USB devices to the
system.

USB 2.0 port (2)

Use the USB 2.0 port to connect USB devices to the
system.

Dell PowerEdge T30 system overview

Содержание PowerEdge T30












































































































Результаты поиска

Содержание PowerEdge T30

Отзывы:

Похожие инструкции для PowerEdge T30

Бренды по названию

Популярные бренды

Dell PowerEdge T30, Руководство пользователя

Результаты поиска

Содержание PowerEdge T30

Отзывы:

Похожие инструкции для PowerEdge T30

Бренды по названию

Популярные бренды