Chassis weight
Table 11. Chassis weight
System
Maximum weight (with all hard drives/SSDs)
PowerEdge T30
11.70 kg (25.70 lb)
Processor specifications
The PowerEdge T30 system supports the following processors:
•
Intel Xeon E3-1200 v5 processor
•
Intel Core i3 series processor
•
Intel Pentium processor
PSU specifications
The PowerEdge T30 system supports a single 290 W AC cabled power supply unit (PSU).
Table 12. PSU specifications
PSU
Heat dissipation (maximum)
Frequency
Voltage
290 W AC
989.00 BTU/hr
50 – 60 Hz
100 – 240 V AC, 5.4 A, autoranging
NOTE:
Heat dissipation is calculated by using the PSU wattage rating.
NOTE:
The PowerEdge T30 system is also designed to connect to the IT power systems with a phase-to-phase voltage not
exceeding 230 V.
System battery specification
The PowerEdge T30 system supports CR 2032 3.0-V lithium coin cell system battery.
Expansion bus specifications
The PowerEdge T30 system supports PCI express (PCIe) generation 3 expansion cards, which must be installed on the system board. The
following table provides detailed information about the expansion card specifications:
Table 13. Expansion card specifications
PCIe slot
Height
Length
Link
1
Full height
Half length
x16
3
Full height
Half length
x4
4
Full height
Half length
x4
NOTE:
Slot 2 is a full-height, half-length PCI 32/33 card slot connected to PCIe and PCI Bridge.
Memory specifications
The PowerEdge T30 system supports up to four 2133 MT/s (ECC) and 2400 MT/s (Non-ECC), single rank or dual rank UDIMMs.
18
Technical specifications
