Dell PowerEdge T30 Скачать руководство пользователя страница 26

Страница: 26 / 107

Option

Description

•

Device Information

Boot Sequence

Specifies the list of devices, in which the system checks for an operating system to install in the

sequence of the listed devices. You can modify the sequence, if necessary. The available devices

are:

•

Diskette Drive

•

USB Storage Device

•

CD/DVD/CD-RW Drive

•

Onboard NIC

•

Internal hard drive(s)

NOTE:

The Diskette Drive option refers to the USB floppy drive.

Boot List Options

Specifies the boot options. The available options are:

•

Legacy

•

UEFI

Advanced Boot Options

Allows you to Enable Legacy Option ROMs. The available options are:

•

Enable Legacy Option ROMs

•

Enable Attempt Legacy Boot

By default, the

Enable Legacy Option ROMs

option is enabled.

Date/Time

Allows you to set the date and time on the system. The changes to the system date and time takes
effect immediately.

Table 23. System configuration

Option

Description

Integrated NIC

Allows you to configure the integrated network controller. The available options are:

•

Enable UEFI Network Stack

•

Disabled

NOTE:

You can use the Disabled option, only if Active Management Technology

(AMT) option is disabled.

•

Enabled

•

Enabled w/PXE

By default, the

Enabled w/PXE

option is selected.

Serial Port

Identifies and defines the serial port settings. You can set the serial port to:

•

Disabled

•

COM1

•

COM2

•

COM3

•

COM4

NOTE:

The operating system may allocate resources even if the Serial port setting is

disabled.

By default, the

COM1

option is selected.

SATA Operation

Allows you to configure the internal SATA hard-drive controller. The available options are:

System Setup

Содержание PowerEdge T30












































































































Результаты поиска

Содержание PowerEdge T30

Отзывы:

Похожие инструкции для PowerEdge T30

Бренды по названию

Популярные бренды

Dell PowerEdge T30, Руководство пользователя

Результаты поиска

Содержание PowerEdge T30

Отзывы:

Похожие инструкции для PowerEdge T30

Бренды по названию

Популярные бренды