Figure A-5. PCI-X/PCIe Riser Card Connectors
Disabling a Forgotten Password
The system's software security features include a system password and a setup password, which are discussed in detail in "Using the System Setup Program"
in your
User's Guide
. The password jumper enables these password features or disables them and clears any password(s) currently in use.
1.
Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
2.
Open the system. See "
Opening the System
" in "Troubleshooting Your System."
3.
Remove the password jumper plug.
See
Figure A
-2
to locate the password jumper on the system board.
4.
Close the system. See "
Closing the System
" in "Troubleshooting Your System."
5.
Reconnect the system to the electrical outlet, and turn on the system.
The existing passwords are not disabled (erased) until the system boots with the password jumper plug removed. However, before you assign a new
system and/or setup password, you must install the jumper plug.
6.
Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.
7.
Open the system.
8.
Install the password jumper plug.
See
Figure A
-2
to locate the password jumper on the system board.
9.
Close the system, reconnect the system to the electrical outlet, and turn on the system.
10.
Assign a new system and/or setup password.
To assign a new password using the System Setup program, see "Using the System Setup Program" in your
User's Guide
.
Back to Contents Page
CAUTION:
Only trained service technicians are authorized to remove the system cover and access any of the components inside the system.
Before performing any procedure, see your
Product Information Guide
for complete information about safety precautions, working inside the
computer and protecting against electrostatic discharge.
NOTE:
If you assign a new system and/or setup password with the jumper plug still removed, the system disables the new password(s) the next
time it boots.
Содержание PowerEdge 850
Страница 90: ......
Страница 132: ...Back to Contents Page ...
Страница 137: ...17 Close the system See Closing the System in Troubleshooting Your System Back to Contents Page ...